|
|
Engine |
- Engine 230 hp Caterpillar turbo diesel
|
- Rating 230 hp (171 kW) gross
|
- Fuel capacity 67 U.S. gallons (254 L)
|
- Hydraulic Capacity 107 U.S. gallons (405L)
|
- Hydraulic Capacity 107 U.S. gallons (405L)Drive System Funk 56000 (Three-pump) drive
|
- Other Features: Quiet-Pak® Sound reduction system is standard.
|
|
Rotary Drive |
- Rotary system Pinion and gear drive
|
- Infinitely variable torque
|
- Rotary (high torque) 13,600 ft-lb(18,300 Nm) @ 0 - 56 rpm
|
- Rotary (medium torque) 10,250 ft-lb(13,900 Nm) @ 0 - 75 rpm
|
- Rotary (low torque) 6,750 ft-lb( 9,220 Nm) @ 0-125 rpm
|
- Max. rotary speed 125 rpm
|
|
|
- Mud flow capacity Up to 250 U.S. gal/minute(945 L/min)
|
- Other features: Rear mounted mud swivel,drive brake, floating carriage,
digital tachometer,wireline commutator, adjustable torque limiter |
|
Carriage Drive |
- Max. thrust/pullback 80,000 lb (36.2 Tonnes)
|
- Carriage system Rack and pinion, six-pinion drive with adjustable force limiter
|
- High carriage speed 54 ft/min (16.5 m/min)
|
- Low carriage speed 25 ft/min ( 7.6 m/min)
|
|
|
- Mechanical, holds 18 pcs of pipe onboard, 135 feet (41.2 m).
|
|
|
|
Drilling Unit |
|
|
- Self propelled on rubber tracks.
|
- Optional rubberized steel tracks available.
|
- Flat Surface Speed 2.0- 3.25 mph (3.2 - 5.2 km/h)
|
|
|
- Wrench/clamp Open top, Pipe Hog™ type
|
- Weight, drill unit Approx. 31,000 lb (14,061 kg)
without pipe Approx. 36,000 lb (16,329 kg) with 18 pieces of pipe |
|
|
- Powered hydraulic augers in foot.
|
- Rear thrust stabillizers resist rearward movement of drill when pushing. H-beam stakes also available.
|
|
Drilling Fluid Pump |
- Onboard Mud Pump Triplex pump with liner wash
|
- Output 0 - 200 GPM (757 L/min)@1100 psi (75.8 Bar), Infinitely variable
|
- On Board Crane (optional)
|
- 6,000 lb (2,722 kg) rated capacity.
|
- Wired remote control pendant.
|
- Boom extends hydraulically.
|
- Winch and slewing drive: high torque hydraulic motors.
|
|
|
|
|
|
|
|
|
- Outside dia. (tube) 3-1⁄2 inch (89 mm)
|
- Tool joint O.D. 4-1⁄8 inch (105 mm)
|
- Thread type 2-7⁄8 IF pin x box
|
|
Protective Equipment |
- Each drill comes with safety mats and electrical grounding rods.
|
- A Zap-Alert system is standard equipment.
|
- Emergencyshut down switch at driller’s console.
|
- The ES!LOK® exit-side lockout system is standard equipment.
|
|
Due to our continuing product improvement, specifications are subject to change without notice. |
|
