DRIVELINE

Hydraulic drive with final drives sealed and enclosed in oil.

Infinitely variable speed.

Direct-drive clutches and multi-disc steering brakes.

Two speed ranges, transport and working.

Hydraulic fixed displacement pump with variable flow from valve to fixed displacement motor on final drive.

Travel/work speeds

Transport ....... 1.8 mph (2.2 km/h)

Working ................. 0 to 30 ft./min. (9.1 m/min.)

OPERATOR ENVIRONMENT

Electric start and shut-down

Hand throttle and choke

Single lever forward/reverse

Dual steering and brake levers

Variable speed creep control

Trencher chain clutch lever

Low noise, low vibration engine

Optional backfill blade controls

Operator noise level .............. 86.7 dB

UNDERCARRIAGE

High-flotation tracks avialable in cleat-type steel or rubber tracks

Track rollers.............................. Sealed

Track ground area ................... 730 in (4710 cm2)

Ground pressure w/backfill blade................... 3.1 psi w/o backkfill blade ............. 2.6 psi

ELECTRICAL SYSTEM

Battery................... 12 volts, 340 CCA

Alternator.................. 12 volt, 16 amp

Gauges

Digital tachometer

Digital hour meter

Low oil shutdown system (engine)

Neutral start safety logic

Seat interlock system

SERVICE CAPACITIES

Fuel tank............................... 5.5 gal (20.8 L)

Engine oil w/ filter change....... 1.75 qt (1.7 L)

Hydraulic reservoir ................. 7.0 gal (26.5 L)

Transmission......................... 1.0 qt (0.95 L)

Satellite gearbox.................... 0.25 qt (0.25 L)

DIMENSIONS / WEIGHTS

Maximum height* - transport ...............................................77” (195.5 cm)

Boom travel - above horizontal....................................................Up 70°

Trencher shaft height.....................................................13.7” (34.8 cm)

Maximum dig depth........................................................ 45” (114.3 cm)

Length of track on ground.............................................. 36.5” (92.7 cm)

Length - basic unit w/o blade,boom and chainline ............................. 85” (215.9 cm)

Boom travel - below horizontal...................................................... Down 60° Backfill blade height........................................................................ 16” (40.8 cm) Backfill blade width........................................................................... 56” (142 cm) Backfill blade lift above ground............................................................ 10” (25 cm) Backfill blade depth of cut .................................................................. 4” (10 cm) Overall width - w/o backfill blade........................................................ 41” (104.1 cm) Overall width - w/ backfill blade straight................................................. 56” (142 cm) Length - basic unit w/blade and w/o boom and chainline......................... 108” (274.3 cm) Length - w/ backfill blade and 40” boom, trencher raised............................. 137” (348 cm) Length w/o backfill blade and w/26” boom, trencher raised....................... 103” (262 cm) Weight - w/40” boom and w/o backfill blade....................................... 1,945 lb (882 kg) Weight - w/40” boom and backfill blade.................................................. 2,315 lb (1050 kg) Weight - w/40” boom, backfill blade and ROPS...................................... 2,450 lb (1111 kg) * With ROPS option.